How to clean air control system?
In order to respond to the requirements of the two types of society in the country, environmental protection and conservation have become increasingly important. Therefore, in order to extend the life of the product, it is still necessary to have some knowledge of maintenance, and the most important thing to maintain is to say clean. Here, Guanya Refrigeration introduces some small methods for cleaning the air cooling system:
More traditional methods are scraping and brushing. Sweep the place where you need to clean and the brush. The dirt that cannot be easily wiped off can be scraped with a sword. The second step is to use high-pressure water or chemical cleaning (mainly pickling), only to get high-pressure water or chemical water in the place where there is dirt to carry out chemical reactions, so that the dirt can be off.
However, this more traditional method does not generally clean thoroughly, and cleaning with chemical water may also cause corrosion to the equipment and damage the machine. After the chemical waste has been washed away, it will take a lot of money to process it. Therefore, cleaning agents can be used. This is also relatively environmentally friendly, safe, and thorough in cleaning. Generally, oxidation does not occur, which is beneficial to the service life of the air cooling system.

Recommandations connexes
-
Closed circulation cooling system debugging attention note
1104Closed circulation cooling system needs to pay attention to some common problems during commissioning. Do a good job in debugging work. LNEYA manufacturers remind users that only when they are ready to work can they be better debugged. The prepara...
Voir les détails -
Disadvantages and advantages of general heat transfer oil heating circulation system
1090The heat conduction oil heating circulation system adopts a fully closed loop structure to directly act on the heat energy to the heated medium. Its advantages are: (1) Due to the continuous renewal of the heat transfer surface, the heat loss is s...
Voir les détails -
The difference between direct contact liquid cooling and cold plate liquid cooling technology
1267The cold plate liquid cooling technology is an implementation method in which the heat of the heating components is indirectly transferred to the cooling liquid enclosed in the circulating pipeline through the cold plate, and the heat is...
Voir les détails -
Pourquoi les chambres à température et humidité constantes ont-elles besoin d'unités de refroidissement à eau ?
898Les chambres à température et humidité constantes ont besoin d'unités de refroidissement à eau principalement pour les raisons suivantes : Contrôle précis de la température et de l'humidité : Les unités de refroidissement à eau peuvent fournir une capacité de régulation de la température efficace et précise...
Voir les détails