Application typique d'un système de régulation de la température de chauffage par réfrigération
LNEYA Contrôle thermostatique dynamique de la source froide et de la source chaude d'une marmite de réaction à haute pression, contrôle thermostatique dynamique d'une marmite de réaction en verre à double couche et contrôle thermostatique dynamique de la source froide et de la source chaude d'un réacteur à double couche. Micro...
Microchannel reactor thermostatic control, small temperature control system, steam – feeding system temperature control, material low temperature aging test.
The thermostatic control of the combined chemical cold source heat source, the cooling heating of the semiconductor equipment and the heating temperature of the vacuum chamber are controlled.

Advantages and functions of temperature control system of refrigeration
Temperature range from 120 to 350, performance superior, unique, high – precision, intelligent temperature control.
High cooling power from 0.5 to 1200kW, highest production stability and repeatable results.
Multi-function alarm system and safety function, use plate heat exchanger, tube type heater to increase heating and cooling rate.
7-inch and 10-inch color TFT touch screen graphics display, use magnetic drive pump, no re-seal leakage problem.
Full airtight system, extended thermal conductivity liquid life, very wide temperature range, no need to change liquid media.
Ultra-high temperature cooling technology can be cooled directly from 300 degrees of high temperature.
The principle and the function has many advantages to using staff: because only expansion of cavity in the body heat conduction medium contact with oxygen in the air (and expansion tank temperature at room temperature to 60 degrees), can achieve lower heat conduction medium absorbed by oxidation and the risk of air moisture.
No heat conduction medium evaporates at high temperature, and it can be achieved -80 ~ 190 degrees, -70 ~ 220 degrees, -88 ~ 170 degrees, -55 ~ 250 degrees, -30 ~ 300 degree continuous temperature control without pressurization.
Adopt full closed pipe design, adopt high efficiency plate heat exchanger, reducing the demand for heat conduction liquid, improve the heat utilization rate of the system, reach the rapid lifting temperature.Thermal conductive medium in a closed system, with a container, expand the heat-conducting medium not participate in circulation in the container, whether high or low temperatures, expansion tank temperature to room temperature to 60 degrees, can reduce the heat conduction medium in running the risk of absorbing the moisture and volatile.
Recommandations connexes
-
L'importance de l'équipement de contrôle de la température TCU dans l'industrie pharmaceutique
9491.les conditions de basse température requises pour les réactions biochimiques à l'intérieur du réacteur : synthèse de médicaments à basse température, etc. 2.le refroidissement rapide des matières premières pour éviter la détérioration des médicaments, la cristallisation et l'extraction à basse température. G...
Voir les détails -
What should I pay attention to when choosing an evaporator for an ultra-low temperature chiller?
1089The evaporator in the ultra-low temperature chiller is one of its four major components, so performance is more important. The selection of ultra-low temperature chillers needs to pay attention to the influence of liquid level on the evaporation t...
Voir les détails -
Instructions d'entretien du condenseur du circulateur de réfrigération à très basse température
1429La maintenance est une tâche importante pour les utilisateurs de circulateurs de réfrigération à très basse température. Wuxi Guanya LNEYA rappelle que l'entretien du condenseur est une tâche relativement importante dans son travail de maintenance. Quels sont donc les points auxquels il faut prêter attention ?
Voir les détails -
Quelles sont les caractéristiques de la réfrigération des refroidisseurs industriels ?
1197If there is a high temperature difference between the inlet and outlet water, then a large external tank will be used to store cold water. In this case, the cooling water will not be directly from the cooler application. Deep into the outside of t...
Voir les détails