Description of LNEYA industrial ultra-low temperature freezer
LNEYA industrial ultra-low temperature freezer is mainly used in industrial cold treatment to precipitate uniform, fine and dispersed carbides on the metal structure matrix. The appearance of such a carbide will bring about a significant increase in the wear resistance and friction properties of the metal, and the hardness will also increase, and will directly increase the life of the wear member. The ideal product to replace liquid nitrogen.
It can also be used for cold shrinkage of copper sleeves, bearings, etc., and is widely used in precision mechanical assembly. It is used in large equipment (automotive, large engineering machinery, aircraft parts, aerospace equipment parts, military equipment parts, ultra-low temperature test. It can be used for touch screen, display freeze degumming, disassembly.
Different manufacturers have different needs, so most of the cold processing equipment is made according to the requirements. Please provide the following indicators when ordering:
1 maximum load;
2 liner size: length, width, height;
3 Full load cooling to the target value time.
LNEYA industrial ultra-low temperature freezer uses nickel-chromium alloy electric heating heater, the controller itself has 2 protection, plus independent temperature limiter protection. Cooling of the equipment: (25 ° ambient temperature, under no-load conditions, from 0 degrees to -110 degrees for about 1.5 hours); (25 ° ambient temperature, under no-load conditions, from 0 degrees to -140 degrees About 2 hours); the device will have a slightly different cooling rate due to changes in ambient temperature.
The control mode of the device is ASET multi-function controller; 7-inch color touch screen, display setting temperature, measuring temperature and so on. The temperature curve records the temperature, and the U disk data is exported. The format is excel table and the fault record. The circulating air inside the cabinet: 2100m3/h; 2750m3/h; 4500m3/h….. When the door is opened, the internal circulation fan is automatically turned off, and the door opening state is displayed on the touch screen screen.
Compressors for all temperature ranges are international brands: Emerson Copeland compressors, which use single-compressor automatic cascade refrigeration technology.

Recommandations connexes
-
The Instruction Of Ultra Low Temperature Freezer Minus 80 Degrees
1200The machine must be tested before usage (or before it is energized again) in the following conditions: when ultra low temperature freezer is first used in ultra low temperature freezer minus 80 degrees, or after the ultra low temperature freezer i...
Voir les détails -
How to install and use the reactor temperature control system?
1094Many users are going to start the installation after purchasing the reactor temperature control system. What should be paid attention to during installation? When installing the reaction kettle of the reactor temperature control system, it is nece...
Voir les détails -
What should I pay attention to when choosing an evaporator for an ultra-low temperature chiller?
1082The evaporator in the ultra-low temperature chiller is one of its four major components, so performance is more important. The selection of ultra-low temperature chillers needs to pay attention to the influence of liquid level on the evaporation t...
Voir les détails -
The Function Introduction of Heating Cooling Translator
1039The HR series heating and cooling circulators produced by wuxi guanya can provide the circulation devices of cold source and heat source, with a wide range of work. They are used in pharmaceutical, chemical, biological and other industries, provid...
Voir les détails