Is the choice of a centrifugal pump or a volumetric pump in a pharmaceutical laboratory?
Performance:
In order to be able to select the type of pump that is suitable in the pharmaceutical laboratory, it is necessary to have a deep understanding of its performance and understand the difference in its specific working principle. To this end, we must understand that the centrifugal pump is dependent on the pressure (or The variable flow phenomenon of the indenter, while the positive displacement pump has a more or less constant flow phenomenon independent of the pressure.
Viscosity:
The centrifugal pump and the positive displacement pump are also different in viscosity, and the flow rate drops when the viscosity rises, and the positive displacement pump actually causes an increase in the flow rate. This is because the higher viscosity liquid fills the voids in the volumetric pump, resulting in higher volumetric efficiency.
Efficiency:
In pharmaceutical laboratories, it is necessary to consider the effect of pressure on the equipment. After all, different pumps have different characteristics. Different efficiencies will increase the pressure of the pump. For volumetric pumps, as the pressure increases, Efficiency will actually increase, and centrifugal pumps have a better efficiency point. On both sides of this point, the overall pump efficiency will drop significantly.
Entrance conditions:
The pharmaceutical laboratory has different conditions for the inlets of these two types of pumps. The centrifugal pump needs to reserve a certain amount of liquid in the pump to form a pressure difference. The liquid-free dry pump cannot be started by itself, due to the volume. The pump agitates the liquid by the expansion and contraction of the liquid volume, and the negative pressure is formed at the inlet, so the volumetric pump can initiate the perfusion. In some cases, this is the decision whether to choose the volumetric pump or the centrifugal pump. Elements.

The selection of different pumps in the pharmaceutical laboratory is to be selected according to their own needs. It takes a lot of time to get the right choice to get a higher benefit.
Recommandations connexes
-
Contact étroit entre les véhicules à énergie nouvelle et les unités de contrôle de la température d'essai des batteries LNEYA
1508Compte tenu de la situation actuelle en matière d'énergie et de l'essor de l'industrie automobile, les véhicules à énergie nouvelle arrivent à point nommé, au même titre que l'industrie automobile moderne. La batterie du véhicule à énergie nouvelle joue un rôle décisif dans la pe...
Voir les détails -
Méthode de dépannage pour la coupure d'eau d'un système de refroidissement entraîné par un moteur de roue
1033L'utilisation à long terme du moteur de roue pour entraîner le système de refroidissement peut rencontrer n'importe quel type de défaillance. Pour le système de refroidissement de l'entraînement du moteur côté roue, s'il y a un problème de coupure d'eau, c'est très dangereux et il faut y remédier rapidement et efficacement.
Voir les détails -
Effet de l'évaporateur sur le système de réfrigération dans un instrument spécial pour l'expérimentation à basse température
1274L'instrument spécial d'expérimentation à basse température est l'équipement de réfrigération et de chauffage du LNEYA pour le laboratoire. L'importance de l'évaporateur est évidente. Quel est donc l'effet de l'évaporateur sur le système de réfrigération ? Selon les di...
Voir les détails -
What is the lack of oil in the 120-degree ultra-low temperature refrigerator?
1213The compressor of the -120 degree ultra-low temperature refrigerator is a complex component that runs at high speed. In order to ensure sufficient lubrication of the moving parts of the compressor crankshaft, bearings, connecting rods, pistons, et...
Voir les détails