LNEYA Industrial Chillers Fabricant Fournisseur
Les travaux suivants doivent être effectués avant la mise en service des refroidisseurs industriels
1. Firstly, check whether the power supply is normal. The voltage of the power supply should not exceed or be lower than the rated voltage of the unit (+10). The commonly used voltage is 3-phase 380V and single-phase 220V. When the voltage is too low or too high, the chiller can not be started.
2. Pour le groupe compresseur avec circuit d'eau, vérifiez soigneusement si le circuit d'eau de refroidissement et le circuit d'eau réfrigérée contiennent de l'eau, si la pression de l'eau est normale, si le système de canalisation de l'eau de refroidissement et de l'eau réfrigérée est débloqué....
3. Check whether all kinds of pressure gauges, thermometers, flowmeters, solenoid valves, relays and energy regulating valves of industrial chillers are in good condition or not.
4. Check the transmission device. If it is driven by belt, we should check whether all kinds of protective devices are completely reliable, whether all kinds of wrong appliances and protective appliances are complete and effective.
5. Check all kinds of valves of high-pressure system and low-pressure system of industrial chiller, and whether the switch state is correct when starting or running.
6. Check crankcase lubricant. The oil level should not be lower than or higher than the indicated oil level. If the lubricating oil is not enough, the same specification and type of lubricating oil should be added.
7. Check whether there is leakage in refrigerant system of industrial chiller and whether there is leakage in lubricating oil system.
8. Check whether the liquid level of the tank is normal, and the liquid level should be kept between one-third and two-thirds.
9. Read records of the handover, records, reports and drawings of the installation and repairment.
The function of industrial chiller is to provide cooling water to lower the temperature of the equipnent, so as to ensure the stability of product quality and improve the production efficiency of the whole factory. In the process of using, we should carefully observe and listen to the voices and abnormalities emitted by the components of the unit, and regularly do maintenance work for the chiller. When the unit is not used for a long time, we should drain the water from the pipeline and cover the unit with articles.
We are industrial chiller suppliers. Welcome to choose and purchase our products.
Recommandations connexes
-
-
Current status of hot and cold rapid temperature change test chamber
1041At present, manufacturers of hot and cold rapid temperature change test chambers are sprouting like spring bamboo shoots, but there are several manufacturers that really grasp the quality. When purchasing a test box, the buyer must first look at t...
Voir les détails -
For emergencies of the water-cooled chiller of the automatic temperature control system of the react
865In the pharmaceutical and chemicalproduction, the automatic temperature control system of the reactor is widelyvisible. In order to ensure the safe production of the enterprise, what shouldusers pay attention to when facing unexpected situation...
Voir les détails -
The main purpose of the ethylene glycol chiller for the heating and cooling unit of the reactor
1197The glycol chiller is suitable forhigh-purity metal, rare substance purification, laboratory environmentsimulation, magnetron sputtering, vacuum coating and other industries. Largecryogenic pump units can provide a cooling environment for labor...
Voir les détails
