Les équipements de contrôle de la température de l'huile thermique étant de plus en plus utilisés, leur utilisation en toute sécurité est un sujet de préoccupation pour les utilisateurs. Pour les fabricants, il est très important de partager les précautions d'utilisation des équipements de thermorégulation...

For users of thermal oil temperature control equipment, the fire protection of these electric heating equipment is very important. Firstly, analyze the cause of the general fire in the electric heating equipment. Place the electric heater that is energized near the flammable or inflammable material, and cause a fire under the high temperature baking for a long time. The electric heater is not equipped with a plug, and the electric wire head is directly inserted into the socket, so that a short circuit may occur and a fire may occur. The user of the heat-conducting oil temperature control device does not remove the plug of the electric heater when leaving, and the time is too long, causing the electric heater to overheat and igniting the adjacent combustible material to cause a fire. The heat-conducting oil temperature control equipment heating wire is used after repeated repairs, which may cause the line to be overloaded and cause a fire. It is worth noting that the heating wire of the heat-conducting oil temperature control device is made of nickel or chrome alloy. Since the power of the electric heater is relatively large, the user may accidentally ignore the safety, and the fire may occur at any time.

In order to prevent the heat conduction oil temperature control equipment from catching fire, the wire must be installed with a plug. The wire end should not be directly inserted into the socket. The temperature of the heat conduction oil temperature control equipment should be replaced in time. The electric heater without the fuse installed in the circuit should not be used. When the temperature control equipment of the heat transfer oil is used, it must be taken care of. When leaving, the plug should be unplugged. In the course of use, if there is a power outage, the plug should be pulled out in time, and should not be forgotten. For the heating wire that has been repaired many times, it is recommended not to use it, and a new heating wire should be replaced. Inflammable and explosive materials are strictly prohibited from drying with heat-conducting oil temperature control equipment. The electric oven should have a temperature-controlled device that prevents the temperature from being too high and prevents the baking time from being too long.

Users and friends, when using heat transfer oil temperature control equipment, can not place flammable materials near the heat transfer oil temperature control equipment, it is recommended to maintain a certain safe distance. (This article is from the source network, if there is any infringement, please contact Lneya to delete, thank you.)