Every microchip goes through a long road before it finds its way into a phone, a car, or a medical device. The process does not end after production. Each chip faces strict testing to prove its reliability and performance. Without testing, no fab can ship products that meet the speed, power, and safety standards customers expect.

Temperature control sits at the center of chip testing. The tiny structures inside wafers react instantly to heat. Even a small shift in degrees can cause errors in measurements, false failures, or worse—chips that pass the test but fail in real-world use. To solve this, fabs rely on refroidisseurs à semi-conducteurs. These systems keep test conditions stable, precise, and repeatable.

What Is Chip Testing?

Chip testing, sometimes called IC testing, is the step where each integrated circuit is verified under different operating conditions. It checks whether the chip performs according to its design before it leaves the factory.

Tests can happen at wafer level or after packaging. In wafer probing, hundreds of chips on a wafer are checked in parallel. After packaging, the devices are tested again to confirm the package did not introduce defects.

During these stages, engineers apply voltage, current, and signal patterns while monitoring the chip’s response. They stress the device with temperature swings, high workloads, and voltage shifts. The goal is to uncover weak points before the chip reaches the customer.

The Key Projects in Chip Testing

Chip testing covers many areas. Some of the most common include:

- Functional testing: Does the chip do what the design intended? This test runs logic operations, memory checks, and timing analysis.

- Parametric testing: Engineers measure electrical properties like resistance, capacitance, and leakage. These numbers reveal whether the chip can perform within spec.

- Burn-in testing: Chips are run at high temperatures and voltages for hours or days. This simulates years of real-world use in a short time.

- Environmental stress testing: Here, chips face extreme cold and heat cycles. This proves they can survive automotive, aerospace, or industrial applications.

All of these projects share one thing—temperature control. Without a reliable cooling system, the results are inconsistent. That is where semiconductor chillers enter the picture.

Why Chip Testing Needs Semiconductor Chillers？

A chiller may look like just another box on the production floor, but in chip testing it is essential.

Contrôle de la température

Heat is unavoidable. As chips process signals, they generate heat. Testing equipment itself also adds more heat. If the test board warms up, the chip under test no longer sees the conditions engineers intended. The numbers become unreliable.

Simulating the real world

Chips must face real-world temperatures. A phone processor might need to work at -20°C on a winter morning or 45°C inside a hot car. Chillers allow test systems to swing between these points with tight accuracy. Without them, stress tests cannot simulate real-life use cases.

Haute précision

Imagine a test where the setpoint is 25°C, but the actual temperature drifts by 2°C. That tiny swing may cause the chip to fail in the lab even though it would work in the field—or worse, pass in the lab and fail later in a customer’s hands. Chillers stop that drift by holding temperature within fractions of a degree.

Fiabilité

Testing hundreds of wafers each day is expensive. If equipment overheats or delivers inconsistent data, production slows and yield drops. A well-designed semiconductor chiller keeps lines moving, results accurate, and scrap rates low.

How to Select a Semiconductor Chiller for Chip Testing？

Not every cooling system is ready for chip testing. Engineers must balance speed, precision, and reliability when making a choice.

Plage de température

Tests often push chips through extremes, from cryogenic lows to scorching highs. A capable chiller can span -80°C to +200°C and shift between points without lag.

Précision

A system that holds steady within ±0.02°C ensures that results are consistent and reproducible, instead of drifting with each cycle.

Capacité de refroidissement

A tabletop setup may draw only a few kilowatts, while a burn-in chamber can demand far more. Matching cooling power to the actual load prevents test interruptions.

Response speed

When conditions change, the system must ramp up or down quickly. Slow transitions waste time and create bottlenecks. Advanced models manage sharp heating and cooling swings with ease.

Connectivity

Modern chillers link directly to wafer probers and automated test equipment. Protocols like RS-485 or Ethernet allow smooth communication and remote control.

Fiabilité

Semiconductor fabs run around the clock, so breakdowns translate into real losses. Choosing equipment with proven uptime, accessible service, and long life helps secure production goals.

For cutting-edge fabs, options such as recirculating chillers, cascade refrigeration, or chiller heater systems deliver the flexibility needed for diverse and demanding test programs.

Conclusion

For fabs, choosing the right semiconductor chiller is as critical as selecting the right tester or probe card. If your team is planning new test lines or facing stability issues with current setups, it may be time to upgrade. Our refroidisseurs à semi-conducteurs are built for accuracy, fast response, and non-stop operation in demanding fabs.

Reach out today and let’s discuss how the right chiller can support your chip testing goals.

Faites-nous part de vos besoins

Refroidisseurs associés

Refroidisseurs à vis

Le coût d'un refroidisseur comprend le coût d'achat, le coût d'exploitation et le coût de maintenance.

refroidisseurs industriels

congélateurs industriels

Refroidisseur VFD

refroidisseur à expansion directe

Refroidisseurs à air

CONTACTEZ-NOUS

TEL：

+86 189 1425 3067

EMAIL：

market@lneya.com

WeChat et WhatsApp：

Vous avez une question ou besoin d'un devis ? Remplissez le formulaire ci-dessous et notre équipe vous répondra sous 24 heures.

Semi-conducteurs FAB

Emballage et essais de semi-conducteurs

API & Intermédiaire

Biopharmaceutique

Nouveaux matériaux | Gaz spéciaux

Matériaux aérospatiaux | Essais

Réacteur tubulaire à microcanaux

Industrie de l'hydrogène

Industrie des nouvelles énergies

Distillation Concentration

Refroidissement des produits chimiques

Matériau cryogénique

Processus de production

Vidéos sur les produits

Enlèvement des livraisons

Centre d'information

Pourquoi les tests de puces ont besoin de refroidisseurs de semi-conducteurs

What Is Chip Testing?

The Key Projects in Chip Testing

Why Chip Testing Needs Semiconductor Chillers？

Contrôle de la température

Simulating the real world

Haute précision

Fiabilité

How to Select a Semiconductor Chiller for Chip Testing？

Précision

Response speed

Connectivity

Fiabilité

Conclusion

Refroidisseurs associés

Refroidisseurs à vis

refroidisseurs industriels

congélateurs industriels

Refroidisseur VFD

refroidisseur à expansion directe

Refroidisseurs à air

CONTACTEZ-NOUS