LNEYA Industrial Chillers Fabricant Fournisseur
Actualités
Précautions pour l'installation d'un refroidisseur spécial pour l'essai des nouvelles énergies
The installation of the special chiller for new energy testing is an important link before operation. The quality of the installation is directly related to the operation and operation status of the special chiller for new energy testing. So, what should be paid attention to in the installation of the special chiller for new energy testing? If the special chiller for new energy test adopts semi-hermetic or fully-hermetic compressor, an oil separator should be installed, and an appropriate amo...
Voir les détails
Function of Evaporator in Air Cooled Chiller
The air-cooled chiller adopts the air cooling mode, which eliminates the essential cooling tower, cooling water pump and pipeline system of the cooling water system, avoids the condenser scaling and water pipe blockage in areas with poor water quality, and saves water resources. It is the most economical and simple machine for maintenance and repair in the current refrigeration equipment. The one-time investment of air-cooled chiller is slightly higher than that of water-cooled chiller, but t...
Voir les détails
Introduction du thermostat à circulation pour le chauffage et la climatisation de LNEYA
Nowadays, the problem that plagues the pharmaceutical and chemical industry is the problem of temperature control. With the increasing industry demand and temperature control requirements of the pharmaceutical and chemical industry, the use of heating and cooling circulator thermostats is also increasing, showing an upward trend. In order to cope with the increasing domestic demand in the pharmaceutical and chemical industry, only constant innovation and optimization of the heating and coolin...
Voir les détails
Compressor key protection of reactor temperature control system
In the operation of the reactor temperature control system, the compressor is the core part, and its performance is more important. Therefore, it is necessary to protect the compressor. Under normal working conditions, the compressor of the temperature control system of the reactor should inhale the dry vapor of the refrigerant. There is also lubricating oil entering the cylinder. If there is too much liquid entering, it is too late to discharge from the exhaust valve, and the pressure in the...
Voir les détails
Comment maintenir la stabilité des performances du refroidisseur d'huile de laboratoire biopharmaceutique ?
1. A suitable working environment to prevent various failures of the oil cooler in the biopharmaceutical laboratory needs to provide a better operating environment for the equipment. Keep the environment clean and tidy, reduce the impact of various types of dust, thereby improving the stability of heat dissipation, improving the cooling performance, reducing the ambient temperature in a shorter period of time, and reducing the energy consumption of equipment used by enterprises. 2. Maintain ...
Voir les détails
What are the main advantages of oil coolers for the biopharmaceutical industry?
In the refrigeration system of the oil cooler in the biopharmaceutical industry, the compressor, the evaporator and the condenser are the indispensable parts of the refrigeration system. The condenser is the equipment that emits heat, which combines the heat absorbed in the evaporator with the compressor The heat converted by the work is transferred to the cooling medium to take away together, which is responsible for the important components of the refrigeration system. If the function decre...
Voir les détails
How to repair the compressor failure in the industrial glycol temperature cycle machine
The industrial glycol temperature machine performs refrigeration and heating reactions under the required process conditions, and the compressor is used as its core accessory. If a fault occurs, the operator should pay attention to summarizing and analyzing the problem. 1. The industrial glycol temperature machine is divided into two parts: heating part and cooling part, which are widely used in chemical industry, reaction kettle and other industries. It can realize mutual switching, speed ...
Voir les détails
Introduction to the quality and configuration of industrial refrigeration and heating circulators
With the development and progress of society, industrial refrigeration and heating circulators are used more in the industry, and the technological level is becoming more and more complex. So, what should users pay attention to after purchasing this equipment? 1. In order to consume electricity, many companies will cut off the power after the experiment. According to the technical staff, we explained that if the industrial refrigeration and heating circulator is powered off in winter, the inn...
Voir les détails
Air-cooled and water-cooled methods of cooling and heating circulators
The cooling heating circulator is controlled by high and low temperature during operation. After the user runs at high temperature and low temperature, it can be heated with heat transfer oil, which is water-cooled and air-cooled. 1. It belongs to electronic equipment. It should be cleaned, dusted, and energized regularly to prevent the components from being damaged by moisture. Partial inspection and performance inspection should be carried out regularly to understand their technical statu...
Voir les détailsPrecautions for small laboratory water chiller before and after startup
In the pharmaceutical and chemical industry, small laboratory water chillers are widely used refrigeration equipment, which are often used in various reaction kettles for refrigeration reactions. In order to maintain the stable operation of the equipment, attention should be paid to the precautions before and after the start-up of small laboratory water chillers. 1、 Small laboratory water chiller before startup 1. Placement environment: when handling and moving the small laboratory water ch...
Voir les détails
